I’m having issues shattering my glacial spikes and proceeding ice lance. I am spamming the Flurry proc as GS is nearing the end of the cast and it’s not shattering. It looks like I’m having micro delays in getting the Flurry cast off which in turn delays my ice lance that also doesn’t shatter.
Here is an example log where you can see I’m performing the correct sequence but inconsistently shattering.
https://www.warcraftlogs.com/reports/FR ... fight=last
I’ve tried playing with the Spellqueuewindow but i haven’t seen much difference. I’m not super close to the boss either and this is a consistent issue across multiple bosses.
Glacial spike shatter
Re: Glacial spike shatter
Might be servdelay..
keep in mind that if you're not sitting at 33.3333% crit u wont be guaranteed a crit from flurry, so there's always gonna be a slight chance of you not critting still
keep in mind that if you're not sitting at 33.3333% crit u wont be guaranteed a crit from flurry, so there's always gonna be a slight chance of you not critting still
Re: Glacial spike shatter
Notice the fight was stormwall. Are you too close to the boss?
GS has a minimum range (~8 yds) where it wont shatter.
GS has a minimum range (~8 yds) where it wont shatter.
- ynotredrum
- Posts: 1
- Joined: Thu Jun 13, 2019 2:23 am
Re: Glacial spike shatter
Did you ever figure this out? I'm having the same issue
-Here are my logs against a target dummy for 5 minutes with a 46% crit rate. I waited until I have a BF proc to shatter every glacial spike, so with a 20% base crit it should be closer to 80% crit rate on frozen targets
-Spellqueuewindow is set to 400ms
-I have tried both spamming the flurry and also single queueing it at various points in the 400ms queue window (which I have marked using quartz). I've found that single queuing it at the beginning of the window works better, but gets me to a ~50-60% crit rate (could also be RNG)
-Video settings are on lowest
It's a HUGE dps loss given the importance of glacial spike to 3xFF builds. No idea what's going wrong
-Here are my logs against a target dummy for 5 minutes with a 46% crit rate. I waited until I have a BF proc to shatter every glacial spike, so with a 20% base crit it should be closer to 80% crit rate on frozen targets
-Spellqueuewindow is set to 400ms
-I have tried both spamming the flurry and also single queueing it at various points in the 400ms queue window (which I have marked using quartz). I've found that single queuing it at the beginning of the window works better, but gets me to a ~50-60% crit rate (could also be RNG)
-Video settings are on lowest
It's a HUGE dps loss given the importance of glacial spike to 3xFF builds. No idea what's going wrong
Who is online
Users browsing this forum: No registered users and 14 guests